- Pessoa De Contato: Mr. ZHAOJING
- Ver detalhes de contato
Intake Valves - fabricante, fábrica, fornecedor da China
Basic Requirements for Valve Design
Basic requirements for valve design In principle, the following considerations apply: A: In order to ensure sufficient air intake, the head diameter should be as large as possible and the gas flow...
Intake and exhaust valves Definition
Intake and exhaust valves There are two types of engine valves: intake valves and exhaust valves. The valve which allows mixture into the cylinder is the air intake valve; the ones through which the...
Engine Valve Manual Grinding Engine Parts
Manual grinding of the valve can be done by "one-time sanding twice inspection" method. First clean the valve and its seat ring and conduit, apply a little valve sand on the valve slope (first use...
Engine Valve Trouble Shooting
Troubleshooting First: visual inspection On the visual inspection, it can be observed whether the top end of the valve stem and the lock clip groove are damaged, and whether the valve taper and the...